Sheet Profiles
Plain, galvanized and colour-coated sheet, flat or roll-formed
Mild steel, galvanized and pre-painted sheet in coil and cut length, supplied flat or roll-formed into corrugated, trapezoidal and tile roofing profiles.
SpecificationsSheet profiles & cold drawn wire
Sheet and wire, held to the number
Roll-formed sheet profiles in plain, galvanized and colour-coated steel, and cold drawn wire in twenty-three gauges from 2 to 24 SWG — produced on automatic lines and measured against the standard, not against the last run.
0.12–20 Sheet thickness, mm
2–24 SWG Wire gauge range
1500 mm Maximum sheet width
Z40–Z275 Zinc coating range
- SHEET PROFILES
- COLD DRAWN WIRE
- 0.12 MM TO 6.00 MM
- 2 SWG TO 24 SWG
- PLAIN · GALVANIZED · COLOUR COATED
- ROLLED TO ANY LENGTH
- HARD DRAWN · ANNEALED · GALVANIZED
- ZINC Z40 TO Z275
- CERTIFIED IN WRITING
- SAKHAKOT WORKS
Capacity
Two lines, done properly
We do not roll pipe. Sun Steel makes two things — roll-formed sheet profiles and cold drawn wire — and the whole works is set up around them rather than fitting them in between other orders.
- 0.12–20
- Sheet thickness, mm
- 2–24 SWG
- Wire gauge range
- 1500 mm
- Maximum sheet width
The range
What we manufacture
One mill, five product lines — pipe, tube, section, scaffold and coil — all made to published international standards.
Cold Drawn Wire
Cold drawn mild steel wire, 2 to 24 SWG, hard drawn or annealed
Cold drawn mild steel wire in twenty-three gauges from 2 to 24 SWG — 7.01 mm down to 0.56 mm — hard drawn, annealed or galvanized, supplied in coil for binding, mesh, fencing, nails, fasteners, springs and general fabrication.
SpecificationsCapability
Two lines, done properly
We do not roll pipe. Sun Steel makes two things — roll-formed sheet profiles and cold drawn wire — and the whole works is set up around them rather than fitting them in between other orders.
More about the company
Applications
What the range gets used for
From municipal water mains to boiler tubing and site scaffolds — the same mill, specified across a dozen sectors.
Typical applications
- Roofing sheets and wall cladding
- Door and window frames
- Heavy duty shelving and racking
- Machine guarding and frames
- Electrical cabinets and enclosures
- Storage tanks and bins
- Shipping container panels
- Industrial sheds and warehouses
- Ducting and ventilation
- Partitions, false ceilings and trunking
- Furniture and white goods pressings
- General fabrication and pressing
- Binding wire for reinforcement
- Welded mesh and wire fencing
- Nail and fastener manufacture
- Chain link and chicken mesh
- Light springs and clips
- Wire rope core
- Baling, tying and stitching wire
- General fabrication
Sectors we supply
- Cement
- Power generation
- Oil refineries
- Sugar
- Textile
- Pharmaceutical
- Mining
- Chemical
- Fertilizer
- Construction & infrastructure
Quality & standards
Made to standard, checked before it ships
Every product in the range is manufactured against a published specification, and every consignment leaves with a mill test certificate.
- ISO 9001 Quality Management Systems Certified quality management system covering manufacturing, inspection and dispatch.
- ASTM A653/A653M Steel sheet, zinc-coated by the hot-dip process Governs galvanized sheet and its coating designations, Z40 through Z275.
- ASTM A1011 / A1008 Hot rolled and cold rolled carbon steel sheet Governs plain mild steel sheet, 0.12 mm to 20 mm.
- EN 10169 Continuously organic coated steel flat products Governs PPGI in polyester, SMP, HDP and PVDF to RAL colours.
Where we make it
Our plant in Sakhakot
The works stand at Sakhakot in Tehsil Dargai, District Malakand — on the N-45 corridor into northern Khyber Pakhtunkhwa — with the head office on Ring Road, Badami Bagh, Lahore. Production, testing and dispatch run from the one site.
Haji Fazal Kabir Korona, Jahazono Dag
Sakhakot, Tehsil Dargai
District Malakand, KPK
Sakhakot, Pakistan
Need a quotation?
Send us your sizes, grades and quantities and we will come back with a price and a lead time.